Lights and sounds of the ECOPRO Gen4
What each color of the two lights and each beep means; it is also the text of the label.
Reviewed by Daniel Morales, founder of Reprorace SL, on
The ECOPRO Gen4 has two lights. Light 1 tells how the tool is and light 2 what is happening on the vehicle. When two states coincide, light 1 shows the most important one, in the order of the table.
| Light 1 (tool) | Meaning |
|---|---|
| Orange, fast blinking | Writing to an ECU or updating the tool: do not disconnect it |
| Steady red | Tool fault |
| Amber, medium blinking | Press the button to accept |
| Blue, fast blinking | Waiting for the button to pair a PC |
| Steady blue | PassThru armed |
| Purple, slow blinking | Bluetooth enrollment open (5 minutes) |
| Cyan, slow blinking | Wi-Fi setup open |
| Green, slow blinking | Reading the vehicle or diagnosis in progress |
| Steady amber | Warning: no network, working offline or low vehicle battery |
| Steady green | Connected and all good |
| White fading on and off slowly | Starting up |
| Light 2 (vehicle) | Meaning |
|---|---|
| Green flash | Traffic on the vehicle bus |
| Red flash | Errors on the vehicle bus |
| Steady amber | No identified cable: the tool does not transmit |
| Off | No activity |
| Beep | Meaning |
|---|---|
| One short | You accepted with the button |
| Three in a row | There was an error |
1. Proposed label for the case
- Fast orange: do not disconnect
- Steady red: fault
- Blinking amber: press the button
- Blue: PC and PassThru
- Green: connected; blinking, reading
- Steady amber: warning
The ECOPRO Gen4 does not dim its lights: orange looks like a strong amber and is told apart by the fast blinking. The same colors and their order apply to the ECO-LITE and the ECO-LITE TOOL. The label is a proposal pending approval.
Important: With the orange light blinking, do not unplug the tool or switch off the ignition: an ECU is being written or the tool is updating.
More guides in this section
- Setting up ECO-LITE
- Adding a unit over Bluetooth from the app
- ECO-LITE lights and button
- ECO-LITE network requirements
- Using ECO-LITE TOOL with your tool
- Vehicle and unit status
- ECOPRO Gen4
- Serial port (RS-232) of the ECOPRO Gen4
- The unit's Wi-Fi code: viewing it, changing it and WPA3
- Setting up the ECOPRO Gen4
- The unit's board revision